With CPU design shifting to an emphasis on improved performance per watt, Intel has followed suit. On Thursday, Intel updated its CPU roadmap with an emphasis on maximizing power efficiency.
In a presentation by Dr. Ann Kelleher, executive vice president and general manager of technology development for Intel, the company stepped through its upcoming technology transitions, explaining them in terms of how much power each new processor will consume. Intel is scheduled to hold an investor day Thursday afternoon to offer Wall Street a deeper look at its business.
Low power is now a growing focus in the chip industry, with rival AMD making it a priority with the Ryzen 6000 Mobile chip. Arm chips have always focused on power efficiency.
After years of stagnating on 14nm technology, however, Intel has committed to aggressive technology shifts over the next few years. This fall, Intel will launch Meteor Lake, the first chip manufactured on the Intel 4 technology, and the first use of Extreme Ultraviolet (EUV) technology by Intel, seen as a necessary step toward next-generation manufacturing technologies. According to Intel, the Meteor Lake client processor will offer a further 20 percent improvement in performance per watt. The Meteor Lake CPU tile will tape out in the second half of 2022, Intel said. (Intel hasn’t said when Meteor Lake will ship.)
Intel didn’t announce a client (PC) processor that will ship in Intel 3, the next-gen manufacturing technology. Instead, Intel said that an undisclosed Xeon processor will be manufactured on that process, and will offer an 18 percent improvement on performance per watt. That Xeon will begin being tested in the second half of 2022 with test wafers.
In 2024, Intel will begin moving to what it calls “the angstrom era,” beginning with another future client processor. It’s here, Intel said, that we’ll begin to see Intel’s “gate all around” (GAA) design, or RibbonFET, as well as the PowerVia technology to improve power efficiency. “Gate-all-around” essentially creates nanowires through the chip.
In the first half of 2024, a PC processor will begin using Intel’s 20A process, the first process of the “Angstrom era.” Here, Intel expects the chip will offer an additional 15 percent in terms of performance per watt, versus the prior generation. Again, Intel says that the first 20A test wafers of this chip will begin emerging from the fab in 2024.
Intel is moving quickly here too. In the second half of 2024, Intel said it expects a client processor to roll out on the new 18A process in the second half of 2024. The client processor will offer up to 10 percent improvement in terms of performance per watt, Kelleher said. In addition to the client processor, there will also be a Xeon processor and a foundry customer operating on the 18A process.
Intel’s packaging technology is moving forward as well. In 2019, Intel announced its Foveros technology, to allow die disaggregation and allow many to fit within a single package. Foveros Omni will take what’s called the “die disaggregation” portion of Foveros and extend that vertically—basically, it will give Intel more tools to mix and match performance cores and low-power cores together inside of the same chip. A second technique, called Foveros Direct, will add direct copper-to-copper bonding for even lower electrical resistance, and thus performance. Intel said Thursday that it believes that Foveros Omni and Foveros Direct will both be manufacturing ready in the second half of 2023.
As PCWorld’s senior editor, Mark focuses on Microsoft news and chip technology, among other beats. He has formerly written for PCMag, BYTE, Slashdot, eWEEK, and ReadWrite.
Newspaper is your news, entertainment, music fashion website. We provide you with the latest breaking news and videos straight from the entertainment industry. Fashion fades, only style remains the same. Fashion never stops. There are always projects, opportunities. Clothes mean nothing until someone lives in them.